Amironda

Picture of by <b>Elena vitalio </b>

by Elena vitalio

Window and Patio Door Project in Mississauga – From White to Modern Black

 

Window and Patio Door Project in Mississauga – From White to Modern Black

We recently completed a window and patio door replacement project in Mississauga, and it came out great.

The house originally had white windows and sliding patio doors installed on a white brick exterior.
On the inside, the jambs and extensions weren’t directly attached to the old windows—most likely they were added later.
That gave us the opportunity to preserve the existing interior work and complete everything from the outside.
In the windows and doors industry, this approach is often referred to as a split frame or hybrid installation.

The customer wanted a more modern look and decided to go with black windows and black patio doors.
To keep the outdoor view as open as possible, the larger windows were installed as fixed units with no frames between—
this really gave the home a clean, uninterrupted view. The smaller windows were done as casement windows
to allow for good airflow and ventilation.

Instead of using the typical 3 1/4” residential frame, we upgraded to a
4 9/16” slim commercial profile. It’s thinner, just as strong, and looks incredibly sharp.
The frame is clean—no extra grooves or detailing—just a simple, modern style that works beautifully with the home’s new black exterior.
Both fixed and operational windows now have the same frame thickness, keeping everything looking neat and consistent.

The homeowner also qualified for the federal Greener Homes Loan, which helped finance the entire project
with 0% interest over 10 years. On top of that, they applied through a local Ontario window rebate program
and received $100 back per window and door opening.

All the new windows are triple glazed with double Low-E coating—one layer on the outside
and one on the inside. The center pane is clear glass. This combo provides great solar control throughout the seasons,
plus it boosts noise reduction and overall energy efficiency.

The before-and-after photos really say it all. You can clearly see the transformation from the original white frames
to the sleek black window frames after installation. It’s a huge upgrade in both style and performance.

Hybrid (Split Frame) Window Installation | Keep Your Interior Trim

  FAQ: What Is Hybrid (Split Frame) Window Installation? Q: What is hybrid or split frame installation? Hybrid installation, also known as split frame installation, is a combination method that involves full-frame replacement on the exterior while preserving the original interior components. This method is typically used when: The existing

Read More »

What Is Stud-to-Stud Window Installation?

  FAQ: What Is Stud-to-Stud Window Installation? Q: What is stud-to-stud installation? Stud-to-stud installation is a full-frame window replacement method where the entire existing window—including all trim, extensions, and frame—is removed down to the structural wall studs. This approach is best when full insulation, maximum energy efficiency, or replacement of

Read More »

Why Interior Finishing Matters More Than You Think. Homes in Barrie

Interior Window and Door Finish — Barrie Homeowner Guide When most Barrie homeowners replace windows or doors, they focus on the glass, exterior design, or energy efficiency. But the real difference in how your home feels and looks inside comes from the interior finish — the part that ties your new window or door

Read More »

FAQ: Window and Door Replacement in Barrie

Window and Door Replacement in Barrie | Trust Build Window and Door Replacement in Barrie That Homeowners Trust Last winter, homeowners across Allandale, Painswick, Holly, and Downtown Barrie kept calling us with the same problems. Cold drafts near the windows. Condensation on the glass. Doors that stick or leak air.

Read More »
Scroll to Top