TRUST BUILD WINDOWS AND DOORS

Picture of by <b>Elena vitalio </b>

by Elena vitalio

Brick-to-Brick Window Installation Guide

FAQ: What Is Brick-to-Brick Window Installation?


Q: What is brick-to-brick installation?

Brick-to-brick installation is a full-frame window replacement method where the entire existing window—including the frame, interior trim, and jamb extension—is removed. The new window is installed directly into the wall studs, allowing for maximum insulation and energy efficiency. This method is ideal when the old frame is damaged or when a complete refresh is desired.


Q: What are the steps involved in brick-to-brick installation?

1. Full Removal of Existing Components

The installer removes all parts of the old window assembly, including:

  • The exterior brickmould
  • The window frame
  • The interior casing (trim)
  • The jamb extension (ledge)

This exposes the entire rough opening from brick to drywall.

2. Cleaning and Preparation

  • The exposed studs (between brick and drywall) are cleaned and vacuumed.
  • Old caulking on the brick is removed to ensure a proper seal.
  • A blue-skin membrane is applied around the perimeter for moisture protection.

3. Installing the New Window

  • The new window, usually with attached brickmould, is placed and centered in the opening.
  • Shims are inserted into the bottom corners to level the window.
  • Once aligned, the window is anchored securely with screws into the studs.

What is shimming? Shimming ensures the window is perfectly level and prevents distortion during and after installation.

4. Insulating the Frame

  • Low-expansion spray foam is applied between the window frame and studs for insulation.
  • Once cured, red construction tape is used to seal and protect the foam-insulated areas.

5. Finishing Interior and Exterior

  • Interior: New trim (interior casing) is installed around the window.
  • Exterior: Caulking is applied around the brickmould to seal the perimeter and finalize the exterior finish.

Q: Why choose brick-to-brick installation?

  • Best option for maximum energy efficiency
  • Ideal if the existing frame is damaged or rotted
  • Allows full insulation between the window and wall
  • Provides a completely fresh look, inside and out

Window Repair or Replacement in Barrie | Save Money Guide

Should You Replace or Repair Your Windows in Barrie? Window repair or replacement in Barrie – this question comes up every winter when homeowners notice drafts, condensation, or broken seals. Last February, a homeowner on Dunlop Street called us about fog between her window panes. She’d already wasted $200 on

Read More »

What Your Front Door Colour Says About Your Barrie Home

What Your Front Door Colour Says About Your Barrie Home Front door colours in Barrie do more than match your shutters. Last month, a homeowner on Cundles Road called us panicking because her yellow front door made her house look “too cheerful” compared to the rest of the street. She

Read More »

4 Major Benefits of Installing Low-E Glass Residential Windows

4 Incredible Benefits of Installing Low-E Glass Residential Windows Due to the advancements in insulation, protection, and solar filtration, choosing the right glass for your windowpane might get confusing. Low-E glass has gained popularity over the years and the market is expected to reach an estimate of $39.4 billion by 2024. It’s

Read More »
Scroll to Top