Amironda

Picture of by <b>Elena vitalio </b>

by Elena vitalio

Brick-to-Brick Window Installation Guide

FAQ: What Is Brick-to-Brick Window Installation?


Q: What is brick-to-brick installation?

Brick-to-brick installation is a full-frame window replacement method where the entire existing window—including the frame, interior trim, and jamb extension—is removed. The new window is installed directly into the wall studs, allowing for maximum insulation and energy efficiency. This method is ideal when the old frame is damaged or when a complete refresh is desired.


Q: What are the steps involved in brick-to-brick installation?

1. Full Removal of Existing Components

The installer removes all parts of the old window assembly, including:

  • The exterior brickmould
  • The window frame
  • The interior casing (trim)
  • The jamb extension (ledge)

This exposes the entire rough opening from brick to drywall.

2. Cleaning and Preparation

  • The exposed studs (between brick and drywall) are cleaned and vacuumed.
  • Old caulking on the brick is removed to ensure a proper seal.
  • A blue-skin membrane is applied around the perimeter for moisture protection.

3. Installing the New Window

  • The new window, usually with attached brickmould, is placed and centered in the opening.
  • Shims are inserted into the bottom corners to level the window.
  • Once aligned, the window is anchored securely with screws into the studs.

What is shimming? Shimming ensures the window is perfectly level and prevents distortion during and after installation.

4. Insulating the Frame

  • Low-expansion spray foam is applied between the window frame and studs for insulation.
  • Once cured, red construction tape is used to seal and protect the foam-insulated areas.

5. Finishing Interior and Exterior

  • Interior: New trim (interior casing) is installed around the window.
  • Exterior: Caulking is applied around the brickmould to seal the perimeter and finalize the exterior finish.

Q: Why choose brick-to-brick installation?

  • Best option for maximum energy efficiency
  • Ideal if the existing frame is damaged or rotted
  • Allows full insulation between the window and wall
  • Provides a completely fresh look, inside and out

Ontario Window Rebates 2025 – Get UP TO 30% Back

  How to Get Up to 30% Back on New Windows & Doors in Ontario – Trust Build Windows and Doors Ontario’s 2025 Window & Door Rebates Are Here – Don’t Miss Out! Homeowners, listen up! If you’ve been holding off on replacing those drafty old windows and doors, 2025

Read More »

2025 Ontario Window & Door Rebates: How to Save on Energy-Efficient Upgrades?

  Ontario Window & Door Rebates 2025 – How to Save on Energy-Efficient Upgrades Introduction Upgrading to energy-efficient windows and doors can lower utility bills, enhance comfort, and increase home value. In 2025, Ontario homeowners can benefit from rebates through the Home Renovation Savings™ program, replacing the previous Home Efficiency

Read More »

3 Common Problems That Are Caused By Poor Window Installations

3 Common Problems That Are Caused By Poor Window Installations Choosing to upgrade your windows isn’t just about enhancing your curb appeal and home’s aesthetics. Windows are crucial components of a house and help regulate indoor lighting and temperature. This is why it’s absolutely necessary that these fixtures are installed

Read More »

ENERGY STAR Window and Door Guidelines for 2020

ENERGY STAR Window and Door Guidelines for 2020 What do the 2020 Guidelines for ENERGY STAR® certified windows and doors mean for you and your home? Trust Build Windows and Doors have summarized the main points of the guidelines and highlighted how these apply to homeowners. This is valuable information

Read More »
Scroll to Top