Amironda

Picture of by <b>Elena vitalio </b>

by Elena vitalio

Brick-to-Brick Window Installation Guide

FAQ: What Is Brick-to-Brick Window Installation?


Q: What is brick-to-brick installation?

Brick-to-brick installation is a full-frame window replacement method where the entire existing window—including the frame, interior trim, and jamb extension—is removed. The new window is installed directly into the wall studs, allowing for maximum insulation and energy efficiency. This method is ideal when the old frame is damaged or when a complete refresh is desired.


Q: What are the steps involved in brick-to-brick installation?

1. Full Removal of Existing Components

The installer removes all parts of the old window assembly, including:

  • The exterior brickmould
  • The window frame
  • The interior casing (trim)
  • The jamb extension (ledge)

This exposes the entire rough opening from brick to drywall.

2. Cleaning and Preparation

  • The exposed studs (between brick and drywall) are cleaned and vacuumed.
  • Old caulking on the brick is removed to ensure a proper seal.
  • A blue-skin membrane is applied around the perimeter for moisture protection.

3. Installing the New Window

  • The new window, usually with attached brickmould, is placed and centered in the opening.
  • Shims are inserted into the bottom corners to level the window.
  • Once aligned, the window is anchored securely with screws into the studs.

What is shimming? Shimming ensures the window is perfectly level and prevents distortion during and after installation.

4. Insulating the Frame

  • Low-expansion spray foam is applied between the window frame and studs for insulation.
  • Once cured, red construction tape is used to seal and protect the foam-insulated areas.

5. Finishing Interior and Exterior

  • Interior: New trim (interior casing) is installed around the window.
  • Exterior: Caulking is applied around the brickmould to seal the perimeter and finalize the exterior finish.

Q: Why choose brick-to-brick installation?

  • Best option for maximum energy efficiency
  • Ideal if the existing frame is damaged or rotted
  • Allows full insulation between the window and wall
  • Provides a completely fresh look, inside and out

How to Choose the Best Vinyl Windows for Your Home

How to Choose the Best Vinyl Windows for Your Home Introduction to High-Quality Vinyl Windows Vinyl windows have become the preferred choice for homeowners due to their durability, energy efficiency, and low maintenance requirements. However, not all vinyl windows are created equal. Some deteriorate quickly, leading to sagging, discoloration, and

Read More »

Why Casement Windows Are the Perfect Choice for Your Home

Casement Windows: The Perfect Upgrade for Your Home What Are Casement Windows? Thinking about upgrading your home’s windows? Look no further than casement windows—one of the most stylish, practical, and energy-efficient choices available today. Designed with a side hinge, these windows swing outward like a door, allowing for maximum airflow

Read More »

Why Interior Finishing Matters More Than You Think. Homes in Barrie

Interior Window and Door Finish — Barrie Homeowner Guide When most Barrie homeowners replace windows or doors, they focus on the glass, exterior design, or energy efficiency. But the real difference in how your home feels and looks inside comes from the interior finish — the part that ties your new window or door

Read More »

FAQ: Window and Door Replacement in Barrie

Window and Door Replacement in Barrie | Trust Build Window and Door Replacement in Barrie That Homeowners Trust Last winter, homeowners across Allandale, Painswick, Holly, and Downtown Barrie kept calling us with the same problems. Cold drafts near the windows. Condensation on the glass. Doors that stick or leak air.

Read More »
Scroll to Top